弱粘结的斜交铺设层合圆柱壳的柱形弯曲

导出了两端简文的具有弱粘结界面的任意斜交铺设层合圆柱壳柱形弯曲问题的一个精确弹性理论解。分析中采用线性弹簧模型来表征界面的弱粘结特性。引进新的物理量改写了基本方程,导出了对应的状态空间列式,并利用变量替换技术将该状态方程转换成常系数状态方程,从而方便求解。最后给出了数值算例,并讨论了弱界面的影响。     

不同边界条件正交各向异性中厚板的振动与稳定分析

本文采用高阶剪切变形理论对正交各向异性中厚矩形板进行振动与稳定分析,数值计算采用样条有限点法,得出了六种不同边界条件矩形板的自振频率和屈曲载荷,并与相应的经典板理论的结果进行比较.结果说明横向剪切变形对复合材料层合板的影响与板的各向异性程度、板的宽厚比(b/h)、层合板的层数和板的支承条件有关,它随着层合板各向异性程度的增加而增加,随着层合板宽厚比的增加而逐渐消失.     

圆钢管型钢再生混凝土短柱偏压力学性能退化研究

为研究圆钢管型钢再生混凝土短柱在偏压荷载作用下的性能退化,进行了10个短柱试件偏心受压试验。主要分析了再生粗骨料取代率、圆钢管径厚比、型钢配钢率和偏心距等参数对试件的荷载-挠度曲线、变形能力、刚度退化及耗能能力的影响。结果表明:该短柱具有较高的承载力和抗弯刚度;与普通混凝土相比,取代率的增加对短柱的承载力和变形是不利的,试件的挠度变形随着取代率的增加而增大,再生粗骨料取代率为100%的试件偏压承载力降低了8.98%,试件刚度退化速率随着取代率的增加而加快,耗能能力逐渐降低;试件的挠度变形随着圆钢管径厚比的增大或型钢配钢率的减小而增大;试件刚度退化速率随圆钢管壁厚、型钢配钢率的增加逐渐变慢,耗能能力增强;另外,偏心距对试件偏压性能影响较为显著,随着偏心距的增大,试件刚度退化和承载力降低更加明显。     

扭转冷作硬化的试验研究及分析

扭转冷作硬化技术，能产生充分的塑性变形，从而使试件后继屈服极限和极限载荷比拉伸冷作硬化有大幅度提高。本文从试验研究和理论分析两个方面深入研究了这一问题，引出了有益的结果。     

A numerical study of the motion of a wave running up a beach

The main difficulty for the numerical calculation of the wave running up a beach is the treatment of its moving water boundary. In this paper a scheme of turning the free boundary problem into a fixed boundary problem is designed. The calculated run-up height is consistent with the experiments. Some interesting wave phenomena are also found.     

高压烧结制备Tb掺杂n型(Bi1–xTbx)2(Te0.9Se0.1)3合金及其微结构和热电性能

采用高压烧结技术制备了稀土元素Tb掺杂的n型Bi2Te2.7Se0.3基纳米晶块体热电材料.将高压烧结成型的样品于633 K真空退火36 h.研究了Tb掺杂量对样品的晶体结构和热电性能的影响.结果表明,高压烧结制备的样品为纳米结构, Tb掺杂使样品的晶胞体积变大,功率因子增大,热导率降低,从而使ZT值提高.Tb掺杂量为x=0.004是最优的掺杂量,该掺杂量的高压烧结样品经退火处理后,于373 K时ZT值达到最大为0.99,并且在323-473 K范围内, ZT值均大于0.8,这对用于温差发电领域具有重要意义.     

Optimization of Active Sites via Crystal Phase,Composition, and Morphology for Efficient Low-Iridium Oxygen Evolution Catalysts

Reducing the amount of iridium in oxygen evolution electrocatalysts without compromising their catalytic performances is one of the major requirements in proton-exchange-membrane water electrolyzers. Herein, with the help of theoretical studies, we show that anatase-type TiO₂-IrO₂ solid solutions possess more active iridium catalytic sites for the oxygen evolution reaction (OER) than IrO₂, the benchmark OER catalyst. Note that the same is not observed for their rutile-type counterparts. However, owing to their thermodynamic metastability, anatase-type TiO₂-IrO₂ solid solutions are generally hard to synthesize. Our theoretical studies demonstrate that such catalytically active anatase-type solid-solution phases can be created in situ on the surfaces of readily available SrTiO₃-SrIrO₃ solid solutions during electrocatalysis in acidic solution as the solution can etch away Sr atoms. We experimentally show this with porous SrTiO₃-SrIrO₃ solid-solution nanotubes synthesized by a facile synthetic route that contain 56 % less iridium than IrO₂ yet show an order of magnitude higher apparent catalytic activity for OER in acidic solution.     

On a Predator–Prey System with Digestion Delay and Anti-predation Strategy

Journal of Nonlinear Science - Predator–prey interactions are among the most complicated interactions between biological species, in which there may be both direct effect (through predation)...